![[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2009_12_09/10_s_HDMI-CR01A_HDMI1.4-TypeC-Receptacle.JPG "[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture")
![[USB3-AR01A] USB3.0 Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/17_s_USB3-AR01A_USB3-TypeA-Receptacle.jpg "[USB3-AR01A] USB3.0 Type A Receptacle Fixture")
![[SFP-P02AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_23/138_s_SFP-P02AR_SFP-Plug-Fixture.jpg "[SFP-P02AR] SFP+ Plug Fixture")
![[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/167_s_HDMI2.1_typeC-CR01AM.jpg "[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/76_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[USB3-IR02AM] USB3.0 Internal Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_01_31/91_s_USB3-IR02AM_USB3.0-Internal-Receptacle-TF.jpg "[USB3-IR02AM] USB3.0 Internal Receptacle Fixture")
![[MHL-CK01AM] MHL Calibration Kit Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_25/31_s_MHL-CK01AM_MHL-Calibration-Kit-TF.JPG "[MHL-CK01AM] MHL Calibration Kit Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set](http://litektw.com/uploads/tadgallery/small/2019_04_16/176_s_5pair20GD.jpg "[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set")
USB2/3/4
Introduction
LiTek's USB3.0 Type B receptacle Test fixture (USB3-BR01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type B cable assembly. It can also be used to measure USB3.0 Type B plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-BR01A. SSRX in the test fixture can be connected to real-time scope. SSTX in the test fixture can be connected to Signal generator or protocol generator.
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
Introduction
LiTek's USB3.0 Micro AB Plug Test fixture (USB3-MP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Micro AB receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-MP01A can be plugged into device port with Micro AB Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type B Plug Test fixture (USB3-BP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Type B receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-BP01A can be plugged into device port with B Type Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
