![[USB3-AR03AM] USB3.0 CTS Type A Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/108_s_USB3-AR03AM_USB3.0-CTS-TypeA-Rec-Fixture.JPG "[USB3-AR03AM] USB3.0 CTS Type A Fixture")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/2_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[USB3-MR03AM] USB3.0 CTS Micro B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/110_s_USB3-MR03AM_USB3.0-CTS-MicroB-Rec-Fixture.JPG "[USB3-MR03AM] USB3.0 CTS Micro B Fixture")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/64_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/97_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3225
[USB3-IR02AM] USB3.0 Internal Receptacle Fixture
Desktop PC's typically have USB ports on the front-panel of the enclosure. Internal cable assemblies are usually used to connect the external USB ports on the front panel to the motherboard. The internal cable assembly may connect the motherboard to the external USB ports via a daughter card, bringing the necessary signals to the USB ports. The USB standard-A connector is mounted on the daughter card, accessible to an end-user from the front of a chassis.
LiTek's USB3.0 Internal Bus Test Fixture USB3-IR02A is used to test the internal cable assembly. Downloads [USB3-IR02AM] USB3.0 Internal Receptacle Test Fixture Datasheet | ||||||
