Language Seletion

Page QR Code

Ramdon Products

[USB3-MP01A] USB3.0 Micro-AB Plug Fixture
[USB3-MP01A] USB3.0 Micro-AB Plug Fixture
[PLT2050D] HDMI Production Tester
[PLT2050D] HDMI Production Tester
[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture
[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture
[MHL-MR01AM] MHL Micro Receptacle Fixture
[MHL-MR01AM] MHL Micro Receptacle Fixture
[MDP-02ARM] Mini DP Receptacle 15G Fixture
[MDP-02ARM] Mini DP Receptacle 15G Fixture
E5071C ENA Network Analyzer
E5071C ENA Network Analyzer
[SFP-P02AR] SFP+ Plug Fixture
[SFP-P02AR] SFP+ Plug Fixture
[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture
[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture
[USB3-AP01A] USB3.0 Type A Plug Fixture
[USB3-AP01A] USB3.0 Type A Plug Fixture
[USB3-CK01A] USB3.0 2X Trace Calibration Kit
[USB3-CK01A] USB3.0 2X Trace Calibration Kit

LiTek Calendar

Last MonthMar 2024Next Month
Su Mo Tu We Th Fr Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Today

Visit Number

Today : 1919
Total : 2144935214493521449352144935214493521449352144935
Count4481
WebAdmin - USB | 2012-11-26 18:03:24

簡介

 PLT3050B is a Production Line Tester designed for USB3.0 Assembly Cable manufactory. Since the data rate of USB2.0 is not enough now, a higher rate is strongly recommended by the PC industry. In this way, USB3.0 is developed to meet this request. There are more and more manufactories to produce USB3.0 related products. For cable, how to meet customer’s request and guarantee the performance becomes a big issue.

Read More...

Count4684
WebAdmin - USB | 2012-04-14 09:08:23

Introduction

 Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA)and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.

 The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss, Near End Noise, Far End Noise, Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quickly troubleshooting and design improvements.

Read More...

Count3850
WebAdmin - USB | 2011-11-23 18:01:33

Introduction

 Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification.  This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.

 The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss , Near End Noise, Far End Noise, Impedance and Skew automatically.  It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design improvements.

Read More...

Count4177
WebAdmin - USB | 2011-11-23 17:56:34

Introduction

 LiTek's USB3.0 2X Trace Calibration fixture (USB3-CK01A) can be used to calibrate the response of the USB3.0 Type A or USB3.0 Type B or USB3.0 Type Micro A/B test fixture .We can get more accuracy by using the Calibration Fixture before testing.

 For USB3.0 Assembly Cable testing. We can reduce the fixture response by calibration. LiTek's USB3.0 2X Trace Calibration fixture (USB3-CK01A) is suitable for the LiTek's USB3.0 test fixture as below:

1.USB3-AR01A: USB3.0 Type A receptacle test fixture.

2.USB3-BR01A: USB3.0 Type B receptacle test fixture.

3.USB3-MR01A: USB3.0 Type Micro A/B receptacle test fixture.

Read More...

Count4328
WebAdmin - USB | 2011-11-23 17:47:39

Introduction

 LiTek's USB3.0 Micro-AB receptacle Test fixture (USB3-MR01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Micro-AB cable assembly. It can also be used to measure USB3.0 Micro-AB plug connectors with suitable test settings.

 For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-MR01A. SSRX in the test fixture can be connected to real-time scope. SSTX in the test fixture can be connected to Signal generator or protocol generator. 

Read More...

Count4383
WebAdmin - USB | 2011-11-23 17:45:39

Introduction

 LiTek's USB3.0 Type B receptacle Test fixture (USB3-BR01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type B cable assembly. It can also be used to measure USB3.0 Type B plug connectors with suitable test settings.

 For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-BR01A. SSRX in the test fixture can be connected to real-time scope. SSTX in the test fixture can be connected to Signal generator or protocol generator. 

Read More...

First Previous 1   2  Next End
Copyright © by LiTek All Rights Reserved.
LiTek Technologies Tel:+886-3-4951851 Add:4F-3, No.18, Huannan Rd., Pingzhen City, Taoyuan County, Taiwan 32448
LiTek Precision Tel:+86-755-27331770 Add:901R, Shencai Building, Fuyong Boulevard, Fuyong Town, Bao'an District, Shenzhen, Guangdong, China 51810