![[HDMI-CK02A] HDMI1.4 Active Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_16/117_s_HDMI-CK02A_HDMI1.4-Active-Cal-Kit.jpg "[HDMI-CK02A] HDMI1.4 Active Calibration Kit")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/63_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[LT-DP1.2-A] DisplayPort Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/42_s_LT-DP1.2-A_DP-Standard-Fixture-Set.jpg "[LT-DP1.2-A] DisplayPort Standard Fixture Set")
![[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2009_12_09/74_s_LT-HDMI1.4-A_HDMI1.4-Standard-Fixture-Set.jpg "[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/98_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[DP-01ARM] DisplayPort Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/103_s_DP-01ARM_DP-Receptacle-TF.jpg "[DP-01ARM] DisplayPort Receptacle Fixture")
![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/101_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/82_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3199
[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture
LiTek's HDMI-CR01A is a HDMI Type C receptacle test fixture used to measure HDMI cable with Type C plugs and HDMI source with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
Downloads [HDMI-CR01A] HDMI 1.4 Type C Receptacle Test Fixture Datasheet-English Version[HDMI-CR01A] HDMI 1.4 Type C Receptacle Test Fixture Datasheet-Chinese Version | ||||||
