![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
![[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_13/77_s_HDMI-DR01A_HDMI1.4-TypeD-Rec-TF.jpg "[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture")
![[USB3-AR03AM] USB3.0 CTS Type A Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/108_s_USB3-AR03AM_USB3.0-CTS-TypeA-Rec-Fixture.JPG "[USB3-AR03AM] USB3.0 CTS Type A Fixture")
![[DPA-12B] DP Probe Plug-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/45_s_DPA-12B_DP-PlugEnd-TF.jpg "[DPA-12B] DP Probe Plug-End Fixture")
![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/100_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
![[USB3-IR02AM] USB3.0 Internal Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_01_31/91_s_USB3-IR02AM_USB3.0-Internal-Receptacle-TF.jpg "[USB3-IR02AM] USB3.0 Internal Receptacle Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/15_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/3_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 5622
[USB3-AR01A] USB3.0 Type A Receptacle Fixture
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A. For USB3.0 Type A plug connector testing. We can soldered DUT on the reference board or terminated in the far end and connected with USB3-AR01A for Impedance and NEXT testing. LiTek Also apply the reference board for standard Type A Plug in option. In some case, we may change the Type A Receptacle for user purpose. Customers can apply their considered type A receptacle to do the USB3-ARXXX as the other test fixtures. Downloads [USB3-AR01A] USB3.0 Type A Receptacle Test Fixture Datasheet | ||||||
