![[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/167_s_HDMI2.1_typeC-CR01AM.jpg "[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture")
![[USB3-IR02AM] USB3.0 Internal Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_01_31/91_s_USB3-IR02AM_USB3.0-Internal-Receptacle-TF.jpg "[USB3-IR02AM] USB3.0 Internal Receptacle Fixture")
![[USB3-MR03AM] USB3.0 CTS Micro B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/110_s_USB3-MR03AM_USB3.0-CTS-MicroB-Rec-Fixture.JPG "[USB3-MR03AM] USB3.0 CTS Micro B Fixture")
![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/80_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
USB2/3/4
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
For USB3.0 Type A plug connector testing. We can soldered DUT on the reference board or terminated in the far end and connected with USB3-AR01A for Impedance and NEXT testing. LiTek Also apply the reference board for standard Type A Plug in option.
In some case, we may change the Type A Receptacle for user purpose. Customers can apply their considered type A receptacle to do the USB3-ARXXX as the other test fixtures.
Downloads
[USB3-AR01A] USB3.0 Type A Receptacle Test Fixture Datasheet
|
|
|
|
|
11-23 [USB3-BR01A] USB3.0 Type B ...