![[USB3-BR01A] USB3.0 Type B Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/18_s_USB3-BR01A_USB3-TypeB-Receptacle.jpg "[USB3-BR01A] USB3.0 Type B Receptacle Fixture")
![[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/85_s_HDMI-AP03AR_HDMI-Probe-Adapter-TF.jpg "[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/95_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/99_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/63_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/4_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/16_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 7385
[LT-USB3.0-A] USB3.0 Standard Fixture Set
Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.
The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss , Near End Noise, Far End Noise, Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design improvements. Downloads [LT-USB3.0-A] USB3.0 Standard Test Fixture Set Datasheet | ||||||
