![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/102_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/99_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2009_12_09/74_s_LT-HDMI1.4-A_HDMI1.4-Standard-Fixture-Set.jpg "[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set")
![[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2009_12_09/10_s_HDMI-CR01A_HDMI1.4-TypeC-Receptacle.JPG "[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/68_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[SAS-MR01AM] Mini SAS 4i Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/106_s_SAS-MR01AM_MiniSAS-4i-TF.jpg "[SAS-MR01AM] Mini SAS 4i Fixture")
![[DPR-12B] DP Receptacle-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/43_s_DPR-12B_DP-RecEnd-TF.jpg "[DPR-12B] DP Receptacle-End Fixture")
![[USB3-CK03BM] USB3.0 TRL Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_13/111_s_USB3-CK03BM_USB3.0-TRL-Cal-Kit.jpg "[USB3-CK03BM] USB3.0 TRL Calibration Kit")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/96_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
USB2/3/4
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
Introduction
LiTek's USB3.0 Micro AB Plug Test fixture (USB3-MP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Micro AB receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-MP01A can be plugged into device port with Micro AB Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type B Plug Test fixture (USB3-BP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Type B receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-BP01A can be plugged into device port with B Type Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
