![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/95_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/82_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/67_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_13/77_s_HDMI-DR01A_HDMI1.4-TypeD-Rec-TF.jpg "[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture")
![[LT-SATA1.0] SATA Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/39_s_SATA-Standard-Fixture-Set.jpg "[LT-SATA1.0] SATA Standard Fixture Set")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/15_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[DPR-12B] DP Receptacle-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/43_s_DPR-12B_DP-RecEnd-TF.jpg "[DPR-12B] DP Receptacle-End Fixture")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/3_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3271
[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture
For long or thin HDMI cable application, most of people will design an active solution inside the cable. In general, most assembly will test their passive HDMI cable by using the Signal generator and TDR as scope to check the Eye diagram result. But this solution can be used only for passive cable. Now, LiTek announced a solution for HDMI active cable eye diagram testing by using the same instruments. LiTek's HDMI-CR02AM HDMI Active Rec Test fixture set can be used to test HDMI active plug cable. LiTek's HDMI-CP01A HDMI Active Plug Test Fixture set can be used to test HDMI active receptacle cable.
Downloads [HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture Datasheet | ||||||
