![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[SFP-P02AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_23/138_s_SFP-P02AR_SFP-Plug-Fixture.jpg "[SFP-P02AR] SFP+ Plug Fixture")
![[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2009_12_09/74_s_LT-HDMI1.4-A_HDMI1.4-Standard-Fixture-Set.jpg "[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set")
![[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/167_s_HDMI2.1_typeC-CR01AM.jpg "[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture")
![[MDP-02APM] Mini DP Plug 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/105_s_MDP-02APM_MiniDP-Plug-15G-TF.jpg "[MDP-02APM] Mini DP Plug 15G Fixture")
![[USB3-IR02AM] USB3.0 Internal Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_01_31/91_s_USB3-IR02AM_USB3.0-Internal-Receptacle-TF.jpg "[USB3-IR02AM] USB3.0 Internal Receptacle Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/97_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/85_s_HDMI-AP03AR_HDMI-Probe-Adapter-TF.jpg "[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3393
[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture
LiTek's HDMI-CP01A is a HDMI Type C Plug test fixture used to measure HDMI connector of C plug or HDMI source (Mobile or Tablet PC) with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Downloads [HDMI-CP01A] HDMI 1.4 Type C Plug with Power Test Fixture Datasheet | ||||||
