![[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2009_12_09/10_s_HDMI-CR01A_HDMI1.4-TypeC-Receptacle.JPG "[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture")
![[USB3-CK03BM] USB3.0 TRL Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_13/111_s_USB3-CK03BM_USB3.0-TRL-Cal-Kit.jpg "[USB3-CK03BM] USB3.0 TRL Calibration Kit")
![[USB3-AR01A] USB3.0 Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/17_s_USB3-AR01A_USB3-TypeA-Receptacle.jpg "[USB3-AR01A] USB3.0 Type A Receptacle Fixture")
![[LT-SATA1.0] SATA Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/39_s_SATA-Standard-Fixture-Set.jpg "[LT-SATA1.0] SATA Standard Fixture Set")
![[MHL-AR01AM] MHL Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_26/29_s_MHL-AR01AM_MHL-TypeA-Receptacle-TF.JPG "[MHL-AR01AM] MHL Type A Receptacle Fixture")
![[LT-6000] SATA III Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/40_s_LT-6000_SATAIII-Probe-Adapter-TF.jpg "[LT-6000] SATA III Probe Adapter Fixture")
![[LT-100R-20GD] 20G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2019_04_16/177_s_20GD-手冊-正面圖_ICC_Change.jpg "[LT-100R-20GD] 20G Raw Cable Fixture")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/2_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 2988
[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture
For long or thin HDMI cable application, most of people will design an active solution inside the cable. In general, most assembly will test their passive HDMI cable by using the Signal generator and TDR as scope to check the Eye diagram result. But this solution can be used only for passive cable. Now, LiTek announced a solution for HDMI active cable eye diagram testing by using the same instruments. LiTek’s HDMI-AR02AM HDMI Active REC Test fixture set can be used to test HDMI active plug cable. LiTek’s HDMI-AP02AM HDMI Active Plug Test Fixture set can be used to test HDMI active receptacle cable.
Downloads [HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture Datasheet-English Version[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture Datasheet-Chinese Version | ||||||
