![[DP-01ARM] DisplayPort Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/103_s_DP-01ARM_DP-Receptacle-TF.jpg "[DP-01ARM] DisplayPort Receptacle Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/99_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[USB3-BR03AM] USB3.0 CTS Type B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/109_s_USB3-BR03AM_USB3.0-CTS-TypeB-Rec-Fixture.JPG "[USB3-BR03AM] USB3.0 CTS Type B Fixture")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/15_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3278
[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture
For long or thin HDMI cable application, most of people will design an active solution inside the cable. In general, most assembly will test their passive HDMI cable by using the Signal generator and TDR as scope to check the Eye diagram result. But this solution can be used only for passive cable. Now, LiTek announced a solution for HDMI active cable eye diagram testing by using the same instruments. LiTek’s HDMI-AR02AM HDMI Active REC Test fixture set can be used to test HDMI active plug cable. LiTek’s HDMI-AP02AM HDMI Active Plug Test Fixture set can be used to test HDMI active receptacle cable.
Downloads [HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture Datasheet-English Version[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture Datasheet-Chinese Version | ||||||
