![[SFP-P01AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_08/137_s_SFP-P01AR_SFP-Plus-Plug-Fixture.jpg "[SFP-P01AR] SFP+ Plug Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/97_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[DP-01ARM] DisplayPort Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/103_s_DP-01ARM_DP-Receptacle-TF.jpg "[DP-01ARM] DisplayPort Receptacle Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[MHL-AR01AM] MHL Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_26/29_s_MHL-AR01AM_MHL-TypeA-Receptacle-TF.JPG "[MHL-AR01AM] MHL Type A Receptacle Fixture")
![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
USB2/3/4
Introduction
LiTek's USB3.0 Type B receptacle Test fixture (USB3-BR01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type B cable assembly. It can also be used to measure USB3.0 Type B plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-BR01A. SSRX in the test fixture can be connected to real-time scope. SSTX in the test fixture can be connected to Signal generator or protocol generator.
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
Introduction
LiTek's USB3.0 Micro AB Plug Test fixture (USB3-MP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Micro AB receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-MP01A can be plugged into device port with Micro AB Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type B Plug Test fixture (USB3-BP01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope. It can be used to measure USB3.0 Type B receptacle connectors with suitable test settings.
For USB3.0 Device testing, USB3-BP01A can be plugged into device port with B Type Receptacle connectors. We can connect SSRX pair to Real-Time Scope to measure signal performance and connect SSTX pair to J-BERT or USB3.0 Protocol generators to check USB3.0 Devices capabilities.
Introduction
LiTek's USB3.0 Type A receptacle Test fixture (USB3-AR01A) can be used to measure the Host Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Type A cable assembly. It can also be used to measure USB3.0 Type A plug connectors with suitable test settings.
For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-AR01A.
