![[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/85_s_HDMI-AP03AR_HDMI-Probe-Adapter-TF.jpg "[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture")
![[QSFP-R07BR] QSFP28 Rec Active Fixture](http://litektw.com/uploads/tadgallery/small/2017_07_20/156_s_qsfp.jpg "[QSFP-R07BR] QSFP28 Rec Active Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/95_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/80_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
![[DPR-12B] DP Receptacle-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/43_s_DPR-12B_DP-RecEnd-TF.jpg "[DPR-12B] DP Receptacle-End Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/65_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[USB3-MR03AM] USB3.0 CTS Micro B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/110_s_USB3-MR03AM_USB3.0-CTS-MicroB-Rec-Fixture.JPG "[USB3-MR03AM] USB3.0 CTS Micro B Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3869
USB3.0 CTS Standard Fixture Set (Mechanism Version)
Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA)and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.
The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss, Near End Noise, Far End Noise, Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quickly troubleshooting and design improvements. Downloads USB3.0 CTS Standard Fixture Set Datasheet (Mechanism Version) | ||||||
