![[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2009_12_09/74_s_LT-HDMI1.4-A_HDMI1.4-Standard-Fixture-Set.jpg "[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set")
![[LT-100R-20GD] 20G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2019_04_16/177_s_20GD-手冊-正面圖_ICC_Change.jpg "[LT-100R-20GD] 20G Raw Cable Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/65_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[MHL-CK01AM] MHL Calibration Kit Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_25/31_s_MHL-CK01AM_MHL-Calibration-Kit-TF.JPG "[MHL-CK01AM] MHL Calibration Kit Fixture")
![[PRB-100-P10-2BM] Differential Probe 1.0 Pitch](http://litektw.com/uploads/tadgallery/small/2016_03_24/178_s_Prb-100-P10-2BM.jpg "[PRB-100-P10-2BM] Differential Probe 1.0 Pitch")
![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/100_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3099
[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture
For long or thin HDMI cable application, most of people will design an active solution inside the cable. In general, most assembly will test their passive HDMI cable by using the Signal generator and TDR as scope to check the Eye diagram result. But this solution can be used only for passive cable. Now, LiTek announced a solution for HDMI active cable eye diagram testing by using the same instruments. LiTek's HDMI-CR02AM HDMI Active Rec Test fixture set can be used to test HDMI active plug cable. LiTek's HDMI-CP01A HDMI Active Plug Test Fixture set can be used to test HDMI active receptacle cable.
Downloads [HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture Datasheet | ||||||
