![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[LT-DP1.2-A] DisplayPort Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/42_s_LT-DP1.2-A_DP-Standard-Fixture-Set.jpg "[LT-DP1.2-A] DisplayPort Standard Fixture Set")
![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/101_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
![[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/167_s_HDMI2.1_typeC-CR01AM.jpg "[HDMI2.1-CR01AM] HDMI2.1 type C Rec Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/76_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[DPA-12B] DP Probe Plug-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/45_s_DPA-12B_DP-PlugEnd-TF.jpg "[DPA-12B] DP Probe Plug-End Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/95_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[USB3-MR03AM] USB3.0 CTS Micro B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/110_s_USB3-MR03AM_USB3.0-CTS-MicroB-Rec-Fixture.JPG "[USB3-MR03AM] USB3.0 CTS Micro B Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 2927
[MHL-AR01AM] MHL Type A Receptacle Fixture
The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.
LiTek's Mobile High-definition Link(MHL) Type A receptacle Test fixture (MHL-AR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is USB Micro B plug. The power may be required from the attached test fixture when testing an MHL Source. The LiTek's MHL-AR01AM can provide power to the source-under test by pin 15 and pin2 marked on the fixture. Downloads [MHL-AR01AM] MHL Type A Receptacle Test Fixture Datasheet | ||||||
