![[LT-6000] SATA III Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/40_s_LT-6000_SATAIII-Probe-Adapter-TF.jpg "[LT-6000] SATA III Probe Adapter Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/65_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/96_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[USB3-CK03BM] USB3.0 TRL Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_13/111_s_USB3-CK03BM_USB3.0-TRL-Cal-Kit.jpg "[USB3-CK03BM] USB3.0 TRL Calibration Kit")
![[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/86_s_HDMI-AP03AR_HDMI-Probe-Adapter-TF.jpg "[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3457
[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture
LiTek's HDMI-DR01A is a HDMI Type D receptacle test fixture used to measure HDMI cable with Type D plugs and HDMI source with HDMI Type D receptacle connector and connected with HDMI D type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
Downloads [HDMI-DR01A] HDMI 1.4 Type D Receptacle Test Fixture Datasheet-English Version[HDMI-DR01A] HDMI 1.4 Type D Receptacle Test Fixture Datasheet-Chinese Version | ||||||
