![[HDMI-CK02A] HDMI1.4 Active Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_16/117_s_HDMI-CK02A_HDMI1.4-Active-Cal-Kit.jpg "[HDMI-CK02A] HDMI1.4 Active Calibration Kit")
![[SFP-P01AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_08/137_s_SFP-P01AR_SFP-Plus-Plug-Fixture.jpg "[SFP-P01AR] SFP+ Plug Fixture")
![[USB3-AR03AM] USB3.0 CTS Type A Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/108_s_USB3-AR03AM_USB3.0-CTS-TypeA-Rec-Fixture.JPG "[USB3-AR03AM] USB3.0 CTS Type A Fixture")
![[LT-100R-20GD] 20G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2019_04_16/177_s_20GD-手冊-正面圖_ICC_Change.jpg "[LT-100R-20GD] 20G Raw Cable Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/94_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3251
[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix
LiTek's HDMI-AP01AM(HPT340) is a HDMI Type A Plug test fixture used to measure HDMI connector or HDMI source with HDMI Type A receptacle connector and connected with HDMI A type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Downloads [HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix Datasheet | ||||||
