![[DPA-12] DP Probe Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/44_s_DPA-12_DP-Probe-TF.jpg "[DPA-12] DP Probe Fixture")
![[LT-100R-40G-30C] 40G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2020_03_04/180_s_LT-100R-40G-30C.jpg "[LT-100R-40G-30C] 40G Raw Cable Fixture")
![[PRB-50-P10-3AM] Delta L pitch 0.5mm](http://litektw.com/uploads/tadgallery/small/2020_01_07/179_s_PRB-50-P10-3AM.jpg "[PRB-50-P10-3AM] Delta L pitch 0.5mm")
![[PLT3050A] USB3.0 Production Tester](http://litektw.com/uploads/tadgallery/small/2011_03_21/46_s_PLT3050A_USB-ProductionLine-Tester.JPG "[PLT3050A] USB3.0 Production Tester")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/63_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[DPR-12B] DP Receptacle-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/43_s_DPR-12B_DP-RecEnd-TF.jpg "[DPR-12B] DP Receptacle-End Fixture")
![[HDMI-CK02A] HDMI1.4 Active Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_16/117_s_HDMI-CK02A_HDMI1.4-Active-Cal-Kit.jpg "[HDMI-CK02A] HDMI1.4 Active Calibration Kit")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 4161
[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture
LiTek’s HDMI2.1-AR01AM is a HDMI Type A receptacle test fixture used to measure HDMI cable with Type A plugs and HDMI source with HDMI Type A receptacle connector and connected with HDMI A type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
Downloads [HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture Datasheet-English Version[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture Datasheet-Chinese Version | ||||||
