![[PRB-100-P10-2BM] Differential Probe 1.0 Pitch](http://litektw.com/uploads/tadgallery/small/2016_03_24/178_s_Prb-100-P10-2BM.jpg "[PRB-100-P10-2BM] Differential Probe 1.0 Pitch")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/2_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/95_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[USB3-BR03AM] USB3.0 CTS Type B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/109_s_USB3-BR03AM_USB3.0-CTS-TypeB-Rec-Fixture.JPG "[USB3-BR03AM] USB3.0 CTS Type B Fixture")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/75_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3126
[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix
LiTek's HDMI-AP01AM(HPT340) is a HDMI Type A Plug test fixture used to measure HDMI connector or HDMI source with HDMI Type A receptacle connector and connected with HDMI A type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Downloads [HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix Datasheet | ||||||
