![[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set](http://litektw.com/uploads/tadgallery/small/2019_04_16/176_s_5pair20GD.jpg "[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set")
![[USB3-BR01A] USB3.0 Type B Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/18_s_USB3-BR01A_USB3-TypeB-Receptacle.jpg "[USB3-BR01A] USB3.0 Type B Receptacle Fixture")
![[MHL-CK01AM] MHL Calibration Kit Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_25/31_s_MHL-CK01AM_MHL-Calibration-Kit-TF.JPG "[MHL-CK01AM] MHL Calibration Kit Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/65_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[LT-DP1.2-A] DisplayPort Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/42_s_LT-DP1.2-A_DP-Standard-Fixture-Set.jpg "[LT-DP1.2-A] DisplayPort Standard Fixture Set")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/97_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[MDP-02ARM] Mini DP Receptacle 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/104_s_MDP-02ARM_MiniDP-Receptacle-15G-TF.jpg "[MDP-02ARM] Mini DP Receptacle 15G Fixture")
![[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_13/77_s_HDMI-DR01A_HDMI1.4-TypeD-Rec-TF.jpg "[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 2757
[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture
LiTek's HDMI-CP01A is a HDMI Type C Plug test fixture used to measure HDMI connector of C plug or HDMI source (Mobile or Tablet PC) with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Downloads [HDMI-CP01A] HDMI 1.4 Type C Plug with Power Test Fixture Datasheet | ||||||
