![[USB3-CK01A] USB3.0 2X Trace Calibration Kit](http://litektw.com/uploads/tadgallery/small/2011_09_27/20_s_USB3-CK01A_USB3-2X-Trace-Calibration-Kit.JPG "[USB3-CK01A] USB3.0 2X Trace Calibration Kit")
![[PLT3050A] USB3.0 Production Tester](http://litektw.com/uploads/tadgallery/small/2011_03_21/46_s_PLT3050A_USB-ProductionLine-Tester.JPG "[PLT3050A] USB3.0 Production Tester")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/64_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
![[LT-6000] SATA III Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/40_s_LT-6000_SATAIII-Probe-Adapter-TF.jpg "[LT-6000] SATA III Probe Adapter Fixture")
![[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set](http://litektw.com/uploads/tadgallery/small/2019_04_16/176_s_5pair20GD.jpg "[LT-100R-20GD-5P] 5Pair 20G Raw Cable Fixture Set")
![[MDP-02APM] Mini DP Plug 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/105_s_MDP-02APM_MiniDP-Plug-15G-TF.jpg "[MDP-02APM] Mini DP Plug 15G Fixture")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/82_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 3752
[MHL-MR01AM] MHL Micro Receptacle Fixture
The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.
LiTek's Mobile High-definition Link (MHL) Micro receptacle Test fixture (MHL-MR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is Micro USB plug. The power may be required from the attached test fixture when testing an MHL Source. The LiTek's MHL-MR01AM can provide power to the source-under test by using LiTek’s MHL-AR01AM which pin 15 and pin2 marked on the fixture. Downloads [USB3-AR01A] USB3.0 Type A Receptacle Test Fixture Datasheet | ||||||
