![[LT-100R-20GD] 20G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2019_04_16/177_s_20GD-手冊-正面圖_ICC_Change.jpg "[LT-100R-20GD] 20G Raw Cable Fixture")
![[LT-100R-40G-30C] 40G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2020_03_04/180_s_LT-100R-40G-30C.jpg "[LT-100R-40G-30C] 40G Raw Cable Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2009_12_09/10_s_HDMI-CR01A_HDMI1.4-TypeC-Receptacle.JPG "[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture")
![[LT-SATA1.0] SATA Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/39_s_SATA-Standard-Fixture-Set.jpg "[LT-SATA1.0] SATA Standard Fixture Set")
![[PRB-50-P10-3AM] Delta L pitch 0.5mm](http://litektw.com/uploads/tadgallery/small/2020_01_07/179_s_PRB-50-P10-3AM.jpg "[PRB-50-P10-3AM] Delta L pitch 0.5mm")
USB2/3/4
Count5170
Introduction
Most of the interfaces are designed by differential 100 ohms system, just like SATA, SAS, Lan, Infiniband, DVI, HDMI, SFP.. etc. The bandwidth of these interfaces is wide up to 20GHz or more. In this way, a good test fixture (Jig) for testing the raw cable with multi-AWG range becomes very important.
LiTek engineering team devoted 2 years and studied the features of raw cable. Now, LT-100R-20G is suitable for this application.
The LT-100R-20G can be used with many instruments as well as TDR, NA and Pulse Generator ..etc. A engineer can easily inspect the cable performance instead of after assembly.
Downloads
Count5170
|
|
|
|
|
11-24 [LT-DP1.2-A] DisplayPort St...
The comments are owned by the poster. We aren't responsible for their content.