![[DPR-12B] DP Receptacle-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/43_s_DPR-12B_DP-RecEnd-TF.jpg "[DPR-12B] DP Receptacle-End Fixture")
![[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/100_s_HDMI-DR02AM_HDMI-Active-TypeD-Recpetacle-TF.jpg "[HDMI-DR02AM] HDMI1.4 Active Type D Receptacle Fixture")
![[MDP-02ARM] Mini DP Receptacle 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/104_s_MDP-02ARM_MiniDP-Receptacle-15G-TF.jpg "[MDP-02ARM] Mini DP Receptacle 15G Fixture")
![[USB3-AR01A] USB3.0 Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/17_s_USB3-AR01A_USB3-TypeA-Receptacle.jpg "[USB3-AR01A] USB3.0 Type A Receptacle Fixture")
![[DPA-12B] DP Probe Plug-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/45_s_DPA-12B_DP-PlugEnd-TF.jpg "[DPA-12B] DP Probe Plug-End Fixture")
![[MHL-MR01AM] MHL Micro Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_25/30_s_MHL-MR01AM_MHL-Micro-Receptacle-TF.JPG "[MHL-MR01AM] MHL Micro Receptacle Fixture")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/80_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/2_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/81_s_HDMI-AR02AM_HDMI-Active-TypeA-Rec-TF.jpg "[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture")
USB2/3/4
Introduction
Most of the interfaces are designed by differential 100 ohms system, just like SATA, SAS, Lan, Infiniband, DVI, HDMI, SFP.. etc. The bandwidth of these interfaces is wide up to 10GHz or more. In this way, a good test fixture (Jig) for testing the raw cable with multi-AWG range becomes very important.
LiTek engineering team devoted 2 years and studied the features of raw cable. Now, LT-100R-4A is suitable for this application.
The LT-100R-4A can be used with many instruments as well as TDR, NA and Pulse Generator ..etc. A engineer can easily inspect the cable performance instead of after assembly.
Downloads
Count4046
|
|
|
|
|
11-24 [LT-100R-20G-4P] 4Pair 20G ...
The comments are owned by the poster. We aren't responsible for their content.