![[LT-6000] SATA III Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/40_s_LT-6000_SATAIII-Probe-Adapter-TF.jpg "[LT-6000] SATA III Probe Adapter Fixture")
![[SAS-MR01AM] Mini SAS 4i Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/106_s_SAS-MR01AM_MiniSAS-4i-TF.jpg "[SAS-MR01AM] Mini SAS 4i Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/68_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/64_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 2974
[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture
LiTek's HDMI-CP01A is a HDMI Type C Plug test fixture used to measure HDMI connector of C plug or HDMI source (Mobile or Tablet PC) with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Downloads [HDMI-CP01A] HDMI 1.4 Type C Plug with Power Test Fixture Datasheet | ||||||
