![[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/85_s_HDMI-AP03AR_HDMI-Probe-Adapter-TF.jpg "[HDMI-AP03AR] HDMI Type A Probe Adapter Fixture")
![[HDMI-CK01A] HDMI1.4 Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_16/116_s_HDMI-CK01A_HDMI1.4-Cal-Kit.JPG "[HDMI-CK01A] HDMI1.4 Calibration Kit")
![[LT-DP1.2-A] DisplayPort Standard Fixture Set](http://litektw.com/uploads/tadgallery/small/2011_11_21/42_s_LT-DP1.2-A_DP-Standard-Fixture-Set.jpg "[LT-DP1.2-A] DisplayPort Standard Fixture Set")
![[SFP-P02AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_23/138_s_SFP-P02AR_SFP-Plug-Fixture.jpg "[SFP-P02AR] SFP+ Plug Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/16_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
![[USB3-AP01A] USB3.0 Type A Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/2_s_USB3-AP01A_USB3-TypeA-Plug.jpg "[USB3-AP01A] USB3.0 Type A Plug Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/76_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
USB2/3/4
|
| ||||||
|
| |||||
|
Hit Rate 7796
[DAP-34A] DVI Plug Fixture
TMDS is the most popular interface between PC and Display. DVI is the first application for this. In this reason, there are many devices with DVI connectors mounted in the TMDS channels.
LiTek's DAP-34A is DVI plug side test fixture, used to test both source and sink devices. There are 8 SMA connectors in the fixture, would be connected to Scope or Signal Generators. CLK, D0, D1 and D2 pairs are defined and used inside. An option 8 pins connector is used to connect external PCB of EDID board. Expect source and side devices measurements, DAP-34A can be also used to test DVI receptacle connectors. By a suitable design of Receptacle side PCB fixture, DAP-34A can then be used to plug into the test board. S-Parameters, Time Domain features of receptacle can be measured by this way. Downloads [DAP-34A] DVI Plug Fixture Datasheet-English Version | ||||||
