![[PRB-100-P10-2BM] Differential Probe 1.0 Pitch](http://litektw.com/uploads/tadgallery/small/2016_03_24/178_s_Prb-100-P10-2BM.jpg "[PRB-100-P10-2BM] Differential Probe 1.0 Pitch")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/15_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/75_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[DPA-12B] DP Probe Plug-End Fixture](http://litektw.com/uploads/tadgallery/small/2011_11_21/45_s_DPA-12B_DP-PlugEnd-TF.jpg "[DPA-12B] DP Probe Plug-End Fixture")
![[PLT3045A] HDMI Programming Tester](http://litektw.com/uploads/tadgallery/small/2010_09_03/53_s_PLT3045A_HDMI-Programming-Tester.JPG "[PLT3045A] HDMI Programming Tester")
![[QSFP-R07BR] QSFP28 Rec Active Fixture](http://litektw.com/uploads/tadgallery/small/2017_07_20/156_s_qsfp.jpg "[QSFP-R07BR] QSFP28 Rec Active Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/80_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
USB2/3/4
簡介
PLT3050B is a Production Line Tester designed for USB3.0 Assembly Cable manufactory. Since the data rate of USB2.0 is not enough now, a higher rate is strongly recommended by the PC industry. In this way, USB3.0 is developed to meet this request. There are more and more manufactories to produce USB3.0 related products. For cable, how to meet customer’s request and guarantee the performance becomes a big issue.
PLT3050B is designed for user as simple as possible, and measuring a DUT is very quick. It’s very suitable for mass productions and quality control. It is designed to reserve old version (PLT3050A) functions, not only to include old types of cables but also add USB3.0 Internal cables for testing. The default setting of testing for a cable is 1 second for each mode. In normal case, one DUT would be tested done for 6 seconds. When the environments of manufactory are under consideration, it’s also designed with LED lights and voices results. After testing, all of the DUT’s results would be saved in PC for further check. The software is designed for several levels in order to let the operator to control easily.
文件下載
|
|
|
|
|
