![[LT-100R-40G-30C] 40G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2020_03_04/180_s_LT-100R-40G-30C.jpg "[LT-100R-40G-30C] 40G Raw Cable Fixture")
![[PRB-50-P10-3AM] Delta L pitch 0.5mm](http://litektw.com/uploads/tadgallery/small/2020_01_07/179_s_PRB-50-P10-3AM.jpg "[PRB-50-P10-3AM] Delta L pitch 0.5mm")
![[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/15_s_HDMI-CP01A_HDMI-TypeC-Plug-with-Power.JPG "[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture")
![[LT-6000] SATA III Probe Adapter Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/40_s_LT-6000_SATAIII-Probe-Adapter-TF.jpg "[LT-6000] SATA III Probe Adapter Fixture")
![[PLT2050D] HDMI Production Tester](http://litektw.com/uploads/tadgallery/small/2009_03_06/47_s_PLT2050D_HDMI-ProductionLine-Tester.jpg "[PLT2050D] HDMI Production Tester")
![[USB3-CK03BM] USB3.0 TRL Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_13/111_s_USB3-CK03BM_USB3.0-TRL-Cal-Kit.jpg "[USB3-CK03BM] USB3.0 TRL Calibration Kit")
![[USB3-BP01A] USB3.0 Type B Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/64_s_USB3-BP01A_USB3-TypeB-Plug.jpg "[USB3-BP01A] USB3.0 Type B Plug Fixture")
![[USB3-BR03AM] USB3.0 CTS Type B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/109_s_USB3-BR03AM_USB3.0-CTS-TypeB-Rec-Fixture.JPG "[USB3-BR03AM] USB3.0 CTS Type B Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[DP-01ARM] DisplayPort Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/103_s_DP-01ARM_DP-Receptacle-TF.jpg "[DP-01ARM] DisplayPort Receptacle Fixture")
USB2/3/4
Introduction
PLT3045A is a tester/programmer which is desiged to test/program HDMI active cable using Synerchip SC2031Q HDMI cable booster chip. The PLT3045A test the HDMI active cable Bit Error Rate (BER) from low bit rate up to 3.4Gbps, find an optimal setting for SC2031Q and program the cable using the optimal setting. The PLT3045A control software implement learning capability to select some best settings for certain type of cable and store the selected settings for later testing the same cable type. There are a lot of setting implemented in Synerchip SC2031Q cable booster to adapt to different cable loss. By the learning capability, the PLT3045A can save a lot of cable test time.
Downloads
Count3562
|
|
|
|
|
11-24 [MHL-AR01AM] MHL Type A Rec...
The comments are owned by the poster. We aren't responsible for their content.