![[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/83_s_HDMI-AP02AM_HDMI-Active-TypeA-Plug-TF.jpg "[HDMI-AP02AM] HDMI1.4 Type A Plug with Power Fixture")
![[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_13/77_s_HDMI-DR01A_HDMI1.4-TypeD-Rec-TF.jpg "[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture")
![[DAP-34A] DVI Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_01_17/90_s_DAP-34A_DVI-Plug-TF.jpg "[DAP-34A] DVI Plug Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/97_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/98_s_HDMI-CR02AM_HDMI-Active-TypeC-Recpetacle-TF.jpg "[HDMI-CR02AM] HDMI1.4 Active Type C Receptacle Fixture")
![[USB3-BR03AM] USB3.0 CTS Type B Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_13/109_s_USB3-BR03AM_USB3.0-CTS-TypeB-Rec-Fixture.JPG "[USB3-BR03AM] USB3.0 CTS Type B Fixture")
![[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture](http://litektw.com/uploads/tadgallery/small/2017_11_02/165_s_HDMI2.1_A_Rec-AR01AM.jpg "[HDMI2.1-AR01AM] HDMI2.1 type A Rec Fixture")
![[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix](http://litektw.com/uploads/tadgallery/small/2012_04_05/96_s_HDMI-AP01AM_HDMI-TypeA-Plug-TF-ForTektronix.jpg "[HDMI-AP01AM] HDMI1.4 Type A Plug Fixture for Tektronix")
![[MDP-02APM] Mini DP Plug 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/105_s_MDP-02APM_MiniDP-Plug-15G-TF.jpg "[MDP-02APM] Mini DP Plug 15G Fixture")
USB2/3/4
Introduction
LiTek's HDMI1.4 test fixture set could be used to measure Type A and Type C cables. Other type connectors are option here. By using TpNA for HDMI, we can measure the high frequency parameters soon.
From HDMI CTS1.4, we can directly measure TEST ID 5-3 TMDS Data Eye Diagram. We can also select other high frequency parameters as followings:
-TEST ID 5-4:Intra-Pair Skew；
-TEST ID 5-5:Inter-Pair Skew；
-TEST ID 5-6:Far End Crosstalk；
-TEST ID 5-7:Attenuation and Phase；
-TEST ID 5-8:Differential Impedance；
-TEST ID 5-15:Utility Line Impedance。
Above list parameters can be used to replace TEST ID5-3. Other TEST Items are not considered here.
The fixture set can be used to test the list parameters in factory. For similar eye diagram testing, the signal generator should be available.
Downloads
[LT-HDMI1.4-A] HDMI 1.4 Standard Test Fixture Set Datasheet(English)
[LT-HDMI1.4-A] HDMI 1.4 Standard Test Fixture Set Datasheet(Chinese)
|
|
|
|
|
11-24 [PLT2050D] HDMI Production ...