![[LT-100R-20GD] 20G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2019_04_16/177_s_20GD-手冊-正面圖_ICC_Change.jpg "[LT-100R-20GD] 20G Raw Cable Fixture")
![[USB3-MP01A] USB3.0 Micro-AB Plug Fixture](http://litektw.com/uploads/tadgallery/small/2011_08_03/4_s_USB3-MP01A_USB3-MicroAB-Plug.jpg "[USB3-MP01A] USB3.0 Micro-AB Plug Fixture")
![[MDP-02ARM] Mini DP Receptacle 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/104_s_MDP-02ARM_MiniDP-Receptacle-15G-TF.jpg "[MDP-02ARM] Mini DP Receptacle 15G Fixture")
![[USB3-MR01A] USB3.0 Micro-AB Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/19_s_USB3-MR01A_USB3-MicroAB-Receptacle.jpg "[USB3-MR01A] USB3.0 Micro-AB Receptacle Fixture")
![[USB3-AR01A] USB3.0 Type A Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_27/17_s_USB3-AR01A_USB3-TypeA-Receptacle.jpg "[USB3-AR01A] USB3.0 Type A Receptacle Fixture")
![[HDMI-CK01A] HDMI1.4 Calibration Kit](http://litektw.com/uploads/tadgallery/small/2012_04_16/116_s_HDMI-CK01A_HDMI1.4-Cal-Kit.JPG "[HDMI-CK01A] HDMI1.4 Calibration Kit")
![[DP-01ARM] DisplayPort Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/103_s_DP-01ARM_DP-Receptacle-TF.jpg "[DP-01ARM] DisplayPort Receptacle Fixture")
![[PLT3050B] USB3.0 Production Line Tester](http://litektw.com/uploads/tadgallery/small/2013_04_10/142_s_PLT3050B_USB3.0-Production-Line-Tester.JPG "[PLT3050B] USB3.0 Production Line Tester")
![[SFP-P01AR] SFP+ Plug Fixture](http://litektw.com/uploads/tadgallery/small/2012_10_08/137_s_SFP-P01AR_SFP-Plus-Plug-Fixture.jpg "[SFP-P01AR] SFP+ Plug Fixture")
![[MHL-CK01AM] MHL Calibration Kit Fixture](http://litektw.com/uploads/tadgallery/small/2011_07_25/31_s_MHL-CK01AM_MHL-Calibration-Kit-TF.JPG "[MHL-CK01AM] MHL Calibration Kit Fixture")
USB2/3/4
Introduction
LiTek's HDMI1.4 test fixture set could be used to measure Type A and Type C cables. Other type connectors are option here. By using TpNA for HDMI, we can measure the high frequency parameters soon.
From HDMI CTS1.4, we can directly measure TEST ID 5-3 TMDS Data Eye Diagram. We can also select other high frequency parameters as followings:
Introduction
LiTek's HDMI-DP01A is a HDMI Type D Plug test fixture used to measure HDMI connector of D plug or HDMI source with HDMI Type D receptacle connector and connected with HDMI D type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.
Introduction
LiTek's HDMI-DR01A is a HDMI Type D receptacle test fixture used to measure HDMI cable with Type D plugs and HDMI source with HDMI Type D receptacle connector and connected with HDMI D type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
Introduction
LiTek's HDMI-CR01A is a HDMI Type C receptacle test fixture used to measure HDMI cable with Type C plugs and HDMI source with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
Introduction
LiTek's HDMI-AR01A is a HDMI Type A receptacle test fixture used to measure HDMI cable with Type A plugs and HDMI source with HDMI Type A receptacle connector and connected with HDMI A type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.
1 
