![[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_12_14/81_s_HDMI-AR02AM_HDMI-Active-TypeA-Rec-TF.jpg "[HDMI-AR02AM] HDMI1.4 Type A Receptacle with Power Fixture")
![[LT-100R-40G-30C] 40G Raw Cable Fixture](http://litektw.com/uploads/tadgallery/small/2020_03_04/180_s_LT-100R-40G-30C.jpg "[LT-100R-40G-30C] 40G Raw Cable Fixture")
![[MDP-02ARM] Mini DP Receptacle 15G Fixture](http://litektw.com/uploads/tadgallery/small/2012_04_05/104_s_MDP-02ARM_MiniDP-Receptacle-15G-TF.jpg "[MDP-02ARM] Mini DP Receptacle 15G Fixture")
![[DPA-12] DP Probe Fixture](http://litektw.com/uploads/tadgallery/small/2009_08_05/44_s_DPA-12_DP-Probe-TF.jpg "[DPA-12] DP Probe Fixture")
![[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture](http://litektw.com/uploads/tadgallery/small/2009_12_09/10_s_HDMI-CR01A_HDMI1.4-TypeC-Receptacle.JPG "[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture")
![[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture](http://litektw.com/uploads/tadgallery/small/2011_09_08/68_s_HDMI-DP01A_HDMI1.4-TypeD-Plug-with-Power.JPG "[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture")
USB2/3/4
Introduction
The Serial ATA interface represents one of the greatest shifts in storage technology to hit our industry over the past decade. Millions of Serial ATA ports and disk drives have shipped into the market, replacing the aging Parallel ATA interface in the desktop. Advancements to the interface encompass greater speed, longer more efficient cabling and advanced features for integration into servers and networked storage environments.
The LiTek LT-SATA1.0 is a total solution for SATA cable and cable assembly high-speed test for both TDR and VNA.It is a high-bandwidth ,good matching,low skew, low crosstalk and reliable test solution.
Introduction
Serial-ATA.org announced the 6Gbps solution. For this application, LiTek provides a suitable test probe adapter named LT-6000. It's used to test SATA system performance and can be directly plugged into Main-Board or other devices.
It's a high bandwidth, low loss, good impedance matching and low skew probe.
Introduction
Litek Technologies MHL cable test solution provides you with a fast and easy way to verify your MHL cable to meet MHL Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain
The TpNA MHL Engine can be easily used to control NA and TDR, following MHL Compliance Test specification. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design improvements.
Introduction
The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.
LiTek's MHL Calibration fixture (MHL-CK01AM) can be used to calibrate the response of the MHL Type A or MHL Type Micro test fixture .We can get more accuracy by using the Calibration Fixture before testing.
Introduction
The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.
LiTek's Mobile High-definition Link (MHL) Micro receptacle Test fixture (MHL-MR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is Micro USB plug.
Introduction
The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.
LiTek's Mobile High-definition Link(MHL) Type A receptacle Test fixture (MHL-AR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is USB Micro B plug.
