LiTek Technologies Co., Ltd.

PLT3050B USB3.0 Production-Line Tester

Mon, 26 Nov 2012 10:03:24 +1500

簡介

　PLT3050B is a Production Line Tester designed for USB3.0 Assembly Cable manufactory. Since the data rate of USB2.0 is not enough now, a higher rate is strongly recommended by the PC industry. In this way, USB3.0 is developed to meet this request. There are more and more manufactories to produce USB3.0 related products. For cable, how to meet customer’s request and guarantee the performance becomes a big issue.

--summary--

　PLT3050B is designed for user as simple as possible, and measuring a DUT is very quick. It’s very suitable for mass productions and quality control. It is designed to reserve old version (PLT3050A) functions, not only to include old types of cables but also add USB3.0 Internal cables for testing. The default setting of testing for a cable is 1 second for each mode. In normal case, one DUT would be tested done for 6 seconds. When the environments of manufactory are under consideration, it’s also designed with LED lights and voices results. After testing, all of the DUT’s results would be saved in PC for further check. The software is designed for several levels in order to let the operator to control easily.

文件下載

[PLT3050B] USB3.0 產線測試機型錄(英文)

[PLT3050B] USB3.0 產線測試機型錄(中文)

SW4032A Multi-Port Coaxial Switch Box

Tue, 23 Oct 2012 06:55:14 +1500

Introduction

　LiTek's SW4032A Test System Consist of two parts, Coaxial Switch Box and RF Test Fixtures. Using the Coaxial Switch Box the customers can enhance the performance and reduce the complex of the testing.

　The SW4032A Switch Box provides 4 X 1 to 8 switches, mostly working with Network Analyzer and used to expand from 4 Ports to 32 Ports. In other words, it can be used to test 2 pairs of differential signals. Fixture set will be optionally selected based on DUT type.

　LiTek's TpNA_Express software is well designed to control SW4032A and Network Analyzer. It can be used to build project, recall project, do calibration and output reports.

--summary--

Downloads

SW4032A Multi-Port Coaxial Switch Box Datasheet(Chinese)

SW2012A Coaxial Switch Box

Wed, 23 May 2012 08:17:23 +1500

Introduction

　LiTek's SW2012A Test System Consist of two parts, Coaxial Switch Box and RF Test Fixtures. Using the Coaxial Switch Box the customers can enhance the performance and reduce the complex of the testing.

　The SW2012A Switch Box provides 4 X 1 to 2 switches, mostly working with Network Analyzer and used to expand from 4 Ports to 8 Ports. In other words, it can be used to test 2 pairs of differential signals. Fixture set will be optionally selected based on DUT type.

　LiTek's TpNA_Express software is well designed to control SW2012A and Network Analyzer. It can be used to build project, recall project, do calibration and output reports.

--summary--

Downloads

SW2012A Coaxial Switch Box Datasheet(English)

SW2012A Coaxial Switch Box Datasheet(Chinese)

USB3.0 CTS Standard Mechanism Fixture Set

Sat, 14 Apr 2012 01:08:23 +1500

Introduction

　Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA)and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.

　The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss, Near End Noise, Far End Noise, Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quickly troubleshooting and design improvements.

--summary--

Downloads

USB3.0 CTS Standard Mechanism Fixture Set Datasheet

Keysight E5071C ENA Network Analyzer

Fri, 25 Nov 2011 06:04:25 +1500

簡介

The E5071C network analyzer offers the highest RF performance and fastest speed in its class, with a wide frequency range and versatile functions. The E5071C is the ideal solution for manufacturing and R&D engineers evaluating RF components and circuits for frequency range up to 20 GHz.

What's New: The new 6.5 and 14 GHz options expand the E5071C's frequency range beyond the existing 4.5, 8.5 and 20 GHz line-up, allowing users to select the most suitable frequency option for their specific application and significantly reducing the production line's cost of test. Both the 6.5 and 14 GHz options support 2- and 4-port configurations. Such flexibility is ideal for component manufacturers, wireless designers and aerospace/defense contractors performing RF component test.

--summary--

下載

Agilent E5071C 網路分析儀型錄(英文)

Agilent E5071C 網路分析儀型錄(繁體中文)

Agilent E5071C 網路分析儀型錄(簡體中文)

[LT-DP1.2-A] DisplayPort Standard Fixture Set

Thu, 24 Nov 2011 10:15:30 +1500

Introduction

　Litek Technologies DisplayPort cable test solution provides you with a fast and easy way to verify your DisplayPort cable to meet DisplayPort Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.

　The TpNA DisplayPort Engine can be easily used to control NA and TDR, following DisplayPort Compliance Test specification to test Return Loss , Insertion Loss , Near End Noise, Far End Noise, Power Sum FEN , Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design.

--summary--

Downloads

[LT-DP1.2-A] DisplayPort Standard Fixture Set Datasheet(English)

[LT-DP1.2-A] DisplayPort Standard Fixture Set Datasheet(Chinese)

[LT-100R-20G-4P] 4Pair 20G Raw Cable Fixture Set

Thu, 24 Nov 2011 09:10:00 +1500

Introduction

　Most of the interfaces are designed by differential 100 ohms system, just like SATA, SAS, Lan, Infiniband, DVI, HDMI, SFP.. etc. The bandwidth of these interfaces is wide up to 20GHz or more. In this way, a good test fixture (Jig) for testing the raw cable with multi-AWG range becomes very important.

　LiTek engineering team devoted 2 years and studied the features of raw cable. Now, LT-100R-20G is suitable for this application.

The LT-100R-20G can be used with many instruments as well as TDR, NA and Pulse Generator ..etc. A engineer can easily inspect the cable performance instead of after assembly.

--summary--

Downloads

[LT-100R-20G-4P] 4Pair 20G Raw Cable Fixture Set Datasheet

[LT-100R-4A] 4Pair Raw Cable Fixture Set

Thu, 24 Nov 2011 08:34:02 +1500

Introduction

　Most of the interfaces are designed by differential 100 ohms system, just like SATA, SAS, Lan, Infiniband, DVI, HDMI, SFP.. etc. The bandwidth of these interfaces is wide up to 10GHz or more. In this way, a good test fixture (Jig) for testing the raw cable with multi-AWG range becomes very important.

　LiTek engineering team devoted 2 years and studied the features of raw cable. Now, LT-100R-4A is suitable for this application.

　The LT-100R-4A can be used with many instruments as well as TDR, NA and Pulse Generator ..etc. A engineer can easily inspect the cable performance instead of after assembly.

--summary--

Downloads

[LT-100R-4A] 4Pair Raw Cable Fixture Set Datasheet

[LT-100R-20G-5P] 5Pair 20G Raw Cable Fixture Set

Thu, 24 Nov 2011 08:30:01 +1500

Introduction

--summary--

Downloads

[LT-100R-20G-5P] 5Pair 20G Raw Cable Fixture Set Datasheet(English)

[LT-100R-20G-5P] 5Pair 20G Raw Cable Fixture Set Datasheet(Chinese)

[DPA-12B] DP Probe Plug-End Fixture

Thu, 24 Nov 2011 08:23:01 +1500

Introduction

　LiTek's DPA-12B is a good probe test fixture for Display-Port Source and Sink signal quality and protocol testing. Not only 4 Lane pairs, Aux Channel, but also all low frequencies signal pins had been extended to the SMA connectors and the 2.54-mm pitch connector.

　Since the pin assignments are reversed in Source and Sink sides. DPA-12B probe test fixture is labeled with SLXX for Source end and with LLXX for Sink (Link) end.

--summary--

Downloads

[DPA-12B] DP Probe Plug-End Fixture Datasheet

[DPA-12] DP Probe Fixture

Thu, 24 Nov 2011 08:21:36 +1500

Introduction

　LiTek's DPA-12 is a good probe test fixture for Display-Port Source and Sink signal quality and protocol testing. Not only 4 Lane pairs, Aux Channel, but also all low frequencies signal pins had been extended to the SMA connectors and the 2.54-mm pitch connector.

　Since the pin assignments are reversed in Source and Sink sides. DPA-12 probe test fixture is labeled with SLXX for Source end and with LLXX for Sink (Link) end.

--summary--

Downloads

[DPA-12] DP Probe Fixture Datasheet

[DPR-12B] DP Receptacle-End Fixture

Thu, 24 Nov 2011 08:14:21 +1500

Introduction

　LiTek's DPR-12B is a good receptacle-end test fixture for Display-Port Source and Sink signal quality and protocol testing. Not only 4 Lane pairs, Aux Channel, but also all low frequencies signal pins had been extended to the SMA connectors and the 2.54-mm pitch connector.

　Since the pin assignments are reversed in Source and Sink sides. DPR-12B probe test fixture is labeled with SLXX for Source end and with LLXX for Sink (Link) end.

--summary--

Downloads

[DPR-12B] DP Receptacle-End Fixture Datasheet

[LT-SATA1.0] SATA Standard Fixture Set

Thu, 24 Nov 2011 08:08:33 +1500

Introduction

　The Serial ATA interface represents one of the greatest shifts in storage technology to hit our industry over the past decade. Millions of Serial ATA ports and disk drives have shipped into the market, replacing the aging Parallel ATA interface in the desktop. Advancements to the interface encompass greater speed, longer more efficient cabling and advanced features for integration into servers and networked storage environments.

　The LiTek LT-SATA1.0 is a total solution for SATA cable and cable assembly high-speed test for both TDR and VNA.It is a high-bandwidth ,good matching,low skew, low crosstalk and reliable test solution.

--summary--

Downloads

[LT-SATA1.0] SATA Standard Fixture Set Datasheet(English)

[LT-SATA1.0] SATA Standard Fixture Set Datasheet(Chinese)

[LT-6000] SATA III Probe Adapter Fixture

Thu, 24 Nov 2011 08:03:52 +1500

Introduction

　Serial-ATA.org announced the 6Gbps solution. For this application, LiTek provides a suitable test probe adapter named LT-6000. It's used to test SATA system performance and can be directly plugged into Main-Board or other devices.

　It's a high bandwidth, low loss, good impedance matching and low skew probe.

--summary--

Downloads

[LT-6000] SATA III Probe Adapter Test Fixture Datasheet

MHL Standard Test Fixture Set

Thu, 24 Nov 2011 07:57:29 +1500

Introduction

　Litek Technologies MHL cable test solution provides you with a fast and easy way to verify your MHL cable to meet MHL Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain

　The TpNA MHL Engine can be easily used to control NA and TDR, following MHL Compliance Test specification. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design improvements.

--summary--

Downloads

MHL Standard Test Fixture Set Datasheet

[MHL-CK01AM] MHL Calibration Kit Fixture

Thu, 24 Nov 2011 07:55:04 +1500

Introduction

　The Mobile High-definition Link is an interface for transmitting digital television audiovisual signals from mobile phones, mobile video players, video cameras, still image cameras and other audiovisual source to television sets, projectors, monitors and other video displays.

　LiTek's MHL Calibration fixture (MHL-CK01AM) can be used to calibrate the response of the MHL Type A or MHL Type Micro test fixture .We can get more accuracy by using the Calibration Fixture before testing.

--summary--

　For MHL Cable Assembly testing, we can reduce the fixture response by calibration. LiTek's MHL Calibration fixture (MHL-CK01AM) is suitable for the LiTek’s MHL test fixture as below ：

1. MHL-AR01AM: MHL Type A receptacle test fixture.

2. MHL-MR01AM: MHL Micro B receptacle test fixture.

3. MHL-MP01AM: MHL Micro Plug test fixture.

Downloads

[MHL-CK01AM] MHL Calibration Kit Fixture Datasheet

[MHL-MR01AM] MHL Micro Receptacle Fixture

Thu, 24 Nov 2011 07:53:12 +1500

Introduction

　LiTek's Mobile High-definition Link (MHL) Micro receptacle Test fixture (MHL-MR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is Micro USB plug.

--summary--

　The power may be required from the attached test fixture when testing an MHL Source. The LiTek's MHL-MR01AM can provide power to the source-under test by using LiTek’s MHL-AR01AM which pin 15 and pin2 marked on the fixture.

Downloads

[MHL-MR01AM] MHL Micro Receptacle Test Fixture Datasheet

[MHL-AR01AM] MHL Type A Receptacle Fixture

Thu, 24 Nov 2011 07:49:30 +1500

Introduction

　LiTek's Mobile High-definition Link(MHL) Type A receptacle Test fixture (MHL-AR01AM) can be used to measure the MHL Cable which one side is HDMI Type A plug and the other side is USB Micro B plug.

--summary--

　The power may be required from the attached test fixture when testing an MHL Source. The LiTek's MHL-AR01AM can provide power to the source-under test by pin 15 and pin2 marked on the fixture.

Downloads

[MHL-AR01AM] MHL Type A Receptacle Test Fixture Datasheet

[PLT3045A] HDMI Programming Tester

Thu, 24 Nov 2011 07:46:56 +1500

Introduction

　PLT3045A is a tester/programmer which is desiged to test/program HDMI active cable using Synerchip SC2031Q HDMI cable booster chip. The PLT3045A test the HDMI active cable Bit Error Rate (BER) from low bit rate up to 3.4Gbps, find an optimal setting for SC2031Q and program the cable using the optimal setting. The PLT3045A control software implement learning capability to select some best settings for certain type of cable and store the selected settings for later testing the same cable type. There are a lot of setting implemented in Synerchip SC2031Q cable booster to adapt to different cable loss. By the learning capability, the PLT3045A can save a lot of cable test time.

--summary--

Downloads

[PLT3045A] HDMI Programming Tester Datasheet(English)

[PLT3045A] HDMI Programming Tester Datasheet(Chinese)

[PLT2050D] HDMI Production Tester

Thu, 24 Nov 2011 07:29:22 +1500

Introduction

　PLT2050D (High Speed Transmission Analyzer) is a powerful online testing machine. Based on real TMDS Tx and Rx protocol and high performance image processor, it can be used to test DVI/HDMI cable assembly in very short time. By this way, you will increase the competitiveness to the market.

　The TX transmitter encodes parallel data and serially transmits an input data stream over a T.M.D.S link (DVI / HDMI Assembly) to the RX receiver. Then PLT2050D compares the different between input Streams and Recovered Streams, and show the result on the LCD platform.

--summary--

Downloads

[PLT2050D] HDMI Production Tester Datasheet(English)

[PLT2050D] HDMI Production Tester Datasheet(Chinese)

[LT-HDMI1.4-A] HDMI 1.4 Standard Fixture Set

Thu, 24 Nov 2011 07:21:25 +1500

Introduction

　LiTek's HDMI1.4 test fixture set could be used to measure Type A and Type C cables. Other type connectors are option here. By using TpNA for HDMI, we can measure the high frequency parameters soon.

　From HDMI CTS1.4, we can directly measure TEST ID 5-3 TMDS Data Eye Diagram. We can also select other high frequency parameters as followings:

--summary--　-TEST ID 5-4:Intra-Pair Skew；

　-TEST ID 5-5:Inter-Pair Skew；

　-TEST ID 5-6:Far End Crosstalk；

　-TEST ID 5-7:Attenuation and Phase；

　-TEST ID 5-8:Differential Impedance；

　-TEST ID 5-15:Utility Line Impedance。

　Above list parameters can be used to replace TEST ID5-3. Other TEST Items are not considered here.

　The fixture set can be used to test the list parameters in factory. For similar eye diagram testing, the signal generator should be available.

Downloads

[LT-HDMI1.4-A] HDMI 1.4 Standard Test Fixture Set Datasheet(English)

[LT-HDMI1.4-A] HDMI 1.4 Standard Test Fixture Set Datasheet(Chinese)

[HDMI-DP01A] HDMI1.4 Type D Plug with Power Fixture

Thu, 24 Nov 2011 07:17:19 +1500

Introduction

　LiTek's HDMI-DP01A is a HDMI Type D Plug test fixture used to measure HDMI connector of D plug or HDMI source with HDMI Type D receptacle connector and connected with HDMI D type cable assembly. There are 4 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 4 pairs are designed less than 3ps.

--summary--

Downloads

[HDMI-DP01A] HDMI1.4 Type D Plug with Power Test Fixture Datasheet

[HDMI-CP01A] HDMI1.4 Type C Plug with Power Fixture

Thu, 24 Nov 2011 07:15:49 +1500

Introduction

　LiTek's HDMI-CP01A is a good probe test fixture for HDMI Source and signal quality and protocol testing. Not only 4 TMDS pairs, but also all low frequencies signal pins had been extended to the SMA connectors and the 2.54-mm pitch connector.

--summary--

Downloads

[HDMI-CP01A] HDMI1.4 Type C Plug with Power Test Fixture Datasheet

[HDMI-DR01A] HDMI1.4 Type D Receptacle Fixture

Thu, 24 Nov 2011 07:12:57 +1500

Introduction

　LiTek's HDMI-DR01A is a HDMI Type D receptacle test fixture used to measure HDMI cable with Type D plugs and HDMI source with HDMI Type D receptacle connector and connected with HDMI D type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.

--summary--

Downloads

[HDMI-DR01A] HDMI1.4 Type D Receptacle Test Fixture Datasheet(English)

[HDMI-DR01A] HDMI1.4 Type D Receptacle Test Fixture Datasheet(Chinese)

[HDMI-CR01A] HDMI1.4 Type C Receptacle Fixture

Thu, 24 Nov 2011 07:10:19 +1500

Introduction

　LiTek's HDMI-CR01A is a HDMI Type C receptacle test fixture used to measure HDMI cable with Type C plugs and HDMI source with HDMI Type C receptacle connector and connected with HDMI C type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.

--summary--

Downloads

[HDMI-CR01A] HDMI1.4 Type C Receptacle Test Fixture Datasheet(English)

[HDMI-CR01A] HDMI1.4 Type C Receptacle Test Fixture Datasheet(Chinese)

[HDMI-AR01A] HDMI1.4 Type A Receptacle Fixture

Thu, 24 Nov 2011 07:05:52 +1500

Introduction

　LiTek's HDMI-AR01A is a HDMI Type A receptacle test fixture used to measure HDMI cable with Type A plugs and HDMI source with HDMI Type A receptacle connector and connected with HDMI A type cable assembly. There are 5 pairs with SMA connectors in the Scope or Signal generator sides. The impedance in the test fixture is well designed between 95~105 ohms. The intra pair skew for all 5 pairs are designed less than 3ps.

--summary--

Downloads

[HDMI-AR01A] HDMI1.4 Type A Receptacle Test Fixture Datasheet(English)

[HDMI-AR01A] HDMI1.4 Type A Receptacle Test Fixture Datasheet(Chinese)

[PLT3050A] USB3.0 Production Tester

Wed, 23 Nov 2011 10:04:06 +1500

Introduction

　PLT3050A (USB 3.0 Cable Production Line Tester) is a powerful online testing machine. Based on real 5Gbps Data rate and high performance processor, it can be used to test USB 3.0 cable assembly in very short time. By this way, you will increase the competitiveness to the market.

--summary--

Downloads

[PLT3050A] USB3.0 Production Tester Datasheet(English)

[PLT3050A] USB3.0 Production Tester Datasheet(Chinese)

[LT-USB3.0-A] USB3.0 Standard Fixture Set

Wed, 23 Nov 2011 10:01:33 +1500

Introduction

　Litek Technologies USB3.0 cable test solution provides you with a fast and easy way to verify your USB3.0 cable to meet Compliance Test Specification. This solution integrates both precision test fixture and TpNA software tested with Network Analyzer (NA) and Time Domain Reflectometry (TDR) and let engineers see the interaction between time and frequency domain.

　The TpNA USB3.0 Engine can be easily used to control NA and TDR, following Compliance Test specification to test Insertion Loss , Near End Noise, Far End Noise, Impedance and Skew automatically. It also outputs an Excel report file immediately that enables engineers to get a complete, fast and accurate test result and thus allowing quick troubleshooting and design improvements.

--summary--

Downloads

[LT-USB3.0-A] USB3.0 Standard Test Fixture Set Datasheet

[USB3-CK01A] USB3.0 2X Trace Calibration Kit

Wed, 23 Nov 2011 09:56:34 +1500

Introduction

　LiTek's USB3.0 2X Trace Calibration fixture (USB3-CK01A) can be used to calibrate the response of the USB3.0 Type A or USB3.0 Type B or USB3.0 Type Micro A/B test fixture .We can get more accuracy by using the Calibration Fixture before testing.

　For USB3.0 Assembly Cable testing. We can reduce the fixture response by calibration. LiTek's USB3.0 2X Trace Calibration fixture (USB3-CK01A) is suitable for the LiTek's USB3.0 test fixture as below:

1.USB3-AR01A: USB3.0 Type A receptacle test fixture.

2.USB3-BR01A: USB3.0 Type B receptacle test fixture.

3.USB3-MR01A: USB3.0 Type Micro A/B receptacle test fixture.

--summary--

Downloads

[USB3-CK01A] USB3.0 2X Trace Calibration Kit Datasheet

[USB3-MR01A] USB3.0 Micro-AB Receptacle Fixture

Wed, 23 Nov 2011 09:47:39 +1500

Introduction

　LiTek's USB3.0 Micro-AB receptacle Test fixture (USB3-MR01A) can be used to measure the Device with USB3.0 Protocol Signal Generator or Real-Time Scope after connect USB3.0 Type A to Micro-AB cable assembly. It can also be used to measure USB3.0 Micro-AB plug connectors with suitable test settings.

　For Host Device testing, we can use a determined USB3.0 cable assembly, then connecting to USB3-MR01A. SSRX in the test fixture can be connected to real-time scope. SSTX in the test fixture can be connected to Signal generator or protocol generator.

--summary--

　For USB3.0 Micro-AB plug connector testing. We can soldered DUT on the reference board or terminated in the far end and connected with USB3-MR01A for Impedance and NEXT testing. LiTek Also apply the reference board for standard Micro-AB Plug in option.

　In some case, we may change the Type B Receptacle for user purpose. Customers can apply their considered Micro-AB receptacle to do the USB3-MRXXX as the other test fixtures.

Downloads

[USB3-MR01A] USB3.0 Micro-AB Receptacle Test Fixture Datasheet